INPUT OPTIONS:
The LaserWedge 30-QS combines the capabilities of a cost
effective, compact, hand held scanner with the flexibility and
mobility of the Compsee keyboard wedge.
The LaserWedge 30-QS has been designed with
the user in mind. With its fieldproven optics you will read
bar code labels quickly and accurately. Its lightweight, ergonomic
design ensures ease of use and operator comfort. It is designed
to be durable with the rubber encased scanner nose to prevent
damage from constant use.
The unique cable design for the LaserWedge 30-QS
allows for connection of a magnetic swipe reader for applications
requiring keyboard entry of both bar code and magnetic stripe
(credit card) data.
Simple programming via menus allow the user to
customize the unit to match the keyboard input required by their
present software. The user can verify the input data to inhibit
invalid data, as well as format the data to match screen input.
The LaserWedge 30-QS is designed to eliminate as much as
possible the manual entry of data.
The LaserWedge 30-QS consists of 3 major
components all built into an ergonomic hand held unit:
Scanner: A visible laser diode based, hand
held moving beam, non-contact scanner
Decode: On�board bar code decoding, including user
programmability to qualify and edit the data.
Keyboard Wedge: The LaserWedge simply plugs in between
the keyboard and display sending data to
the display as if it were keyed.
The keyboard remains active at all times.
SPECIFICATIONS
BAR CODE SYMBOLOGIES
Auto-discriminates between the following symbologies
Code 3 of 9 Code 3 of 9 Extended
Interleaved 2 of 5 Industrial 2 of 5
Codabar Code 11
Code 128 Plessey
Code 93 Matrix 2 of 5
UPC A EAN/JAN 8
UPC E EAN/JAN 13
SCANNER CHARACTERISTICS
Light Source 670 nm visible laser diode (VLD)
Scan Rate 30 scans per second
Skew Angle #177; 65°
Pitch Angle ± 50°
Laser Classification CDHR Class II
DEPTH OF FIELD
Bar Code Width Depth of Field
Inches
7.5 Mil 1.0" - 6.0"
10.0 Mil 1.0" - 8.0"
100 % UPC 0.0" - 8.5"
20.0 Mil 0.0" - 11.0"
55.0 Mil 0.0" - 12.0"
DIMENSIONS
Length 4.5"
Height 5.5"
Width 2.5"
Weight 4.8 oz. Without Cord
POWER REQUIREMENTS
Power is consumed from the terminal on most
keyboard interfaces. An external 5 Volt power supply
is required for RS 232 communications.
Supply Voltage 4.75 14 VDC
Current Consumption 135 mA
ENVIRONMENTAL CHARACTERISTICS
Operating Temperature 11° F to 122° F
(-22° C to 50° C)
NonOperating Temperature 40° F to 158°F
(-40° C to 70° C)
Relative Humidity 5% to 95% (NonCondensing)
Ambient Light Functions when exposed to normal
office and direct sunlight
(8000 ft. candles)
Contaminants Meets the windblown dust and
rain requirements of MIL STD
810 sections 506.02H and 510.2I
Shock Scanner will function normally
after a 5 foot drop
Electrostatic Discharge 15 kv to any external surface
OPTIONS
Magnetic Swipe Reader Tracks 1, 2 or 1&2
Auto Sense Stand Hands Free Scanning
Marker Beam
Power Supply
The LaserWedge 30-QS programmability lets the user customize
by defining data input validation and data output formatting.
GENERAL PARAMETER
Communication Mode Auto Sense On/Off
Terminal Type Keyboard Type
Buffer Enable/Disable Beeper Volume
Intercharacter Delay Mag Track Select
Interfunction Delay
BAR CODE INPUT PARAMETERS
Preamble - (Up to 16 Characters or Functions)
Postamble - (Up to 16 Characters or Functions)
Embedded Function Code Code Identification
Redundancy Code ID Transmit
Code Enable/Disable Code Length
Check Digit Checks Start/Stop Transmit
Check Digit Transmit
SERIAL PARAMETERS
Baud Rate Parity
Word Length Stop Bits
Protocol Enable Keyboard Functions
INPUT / OUTPUT DATA EDIT PARAMETERS
Qualify by Port Add Data
Qualify by Symbology Delete Data
Qualify by Length Reformat Data
Qualify by Data Match Define 2 Output Formats
EXAMPLES - USER PROGRAMMING
1) Qualify by Length, Symbology and 2 Match Positions
- If Code 3 of 9 - Position 4 = M
- 12 Digits - Position 7 = T
Output Format = Ignore Match Characters,
Insert Tab and Enter
Input Record: 192
M74
T93842
Output Format: 192<Tab>7493842<Enter>
2) Qualify by Symbology and 1 Match Position
- If Code 128 - Position 8 = 5
- Variable Length
Output Format = Ignore Match Character
Insert Data and Function Codes
Input Record: 0043300
5920000223
Output Format: 0043300<F9><9001><Enter>
920000223<ALT"B">
