QUICKCHECK� OLV-20 On-Line Verifier

Overview

The Quick Check On-Line Verifier (OLV) series of bar code verifiers provides continuous inspection of labels on line as they are being printed, applied, stacked or handled. They will verify labels at speeds up to 8 inches per second based on a half-inch bar code height.

Offering a wide variety of features, the Quick Check On-Line verifiers were designed to meet specific bar code verification applications. The Model 20 was designed with the laser separate from the verifier for remote or conveyor verification applications. Power is supplied from an internal power supply.

The user has total control of the verification system. Data from the verifier can be used to control the printer's, conveyor's or handling mechanism's functions, such as: pause, reprint, illuminate an indicator, activate an alarm, shut down, divert, or other function of your choice. The output may be programmed to be activated by a single event or by a specified number of consecutive or accumulative events. All events and activations are stored and the data can be used for reference, printing reports or for downloading to a host system in real time or at some later time after the job has been run.

Features/Benefits

Precise, continuous bar code verification.
Real-time tracking and control of bar code production.
Flexible - easy to program to meet your needs.
Full-feature design - warns of "no read" and missing symbols.
Provides both synchronized and unsynchronized (freescan) operation.
Scanner module separate from control module.

Verification

Symbologies Verified:: Code 39; Interleaved 2 of 5; UPC/EAN/JAN with addendums; Codabar; Code 128; Code 93
Applications Verified:: AIAG B-1; AIAG B-3, B-4, B-5; LOGMARS; CASE CODE
Verification Methods:: Traditional; ANSI/CEN

Performance

Scanner Illumination:: Moving beam @ 670nm
System Scan Rate:: 40 scans/sec (nominal)
System Analysis Time:: 50 ms (nominal)
Minimum X Dimension:: 7.5 mil (0.19 mm)

Configuration

Separate controller and scanner

Mechanical Specifications

Keypad:: 4-button: select, enter, F1, F2
Display:: LCD: 2 line, 16 characters/line
Dimensions:: Control Box; 9.125in W x 9.125in H x 3.125in D; (23.2cm W x 23.2cm H x 7.9cm D); Scanner; 3.0in W x 2.2in H x 6.1in D; (7.6cm W x 5.6cm H x 15.5cm D)
Weight:: Control Box; 4 lbs (1800 g); Scanner; 1.1 lbs (499 g)

Electrical Specifications

Communications:: RS-232
Input Voltage:: 115 VAC (�10%) @60 Hz
Output Voltage:: 24 VDC (+10%) (125 mA max.)
Indicators:: Six LEDs: five indicate output status, one indicates synchronization
Open Collector Outputs:: 250 mA sink max.; 24 VDC pull-up max.
Switch Input:: Internal 10K pull-up to 5 VDC; External pull-up to 24 VDC maximum is allowed
Electrically Isolated Input:: 2 wires: + and -; Input resistance: 47K ohms; Activation voltage: +15 VDC to +100 VDC; 120 Hz fully rectified 100 VDC RMS is acceptable

Environmental Specifications

Regulatory approvals:: FCC Class A limits
Operating temperature range:: 32 to 122� F (0 to 50� C)
Storage temperature range:: -40 to 158� F (-40 to 70� C)
Relative Humidity:: 5% to 95% (non-condensing)

Models and Accessories

  Model     Description
 --------   ------------------------------------
 QCOLV20    QUICKCHECK On-Line Verifier Model 20

Accessory   Description
---------   --------------------------------------------------------
 QCOMOLV    QC On-Line Verifier Operator's Manual (specify Model 20)

Interfaces

 Interface    Description
-----------   ---------------------------------------------------------
QCOLVCRS232   QC On-Line Verifier RS-232 Communication Cable
QCOLVC20U     QC On-Line Verifier Model 20 Unterminated Interface Cable

Specifications are subject to change without notice.

PSC and the PSC logo are registered trademarks and QUICKCHECK is a trademark of PSC Inc.

Click here to return to Verifier Products

Click here for PSC Product Information

Click here for PSC Pricing Information